home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-19 / cadshl21.zip / CADSHELL.DOC < prev    next >
Text File  |  1991-12-12  |  10KB  |  196 lines

  1.  
  2.  
  3.  
  4.  
  5.                              CADSHELL 2.1
  6.  
  7.         Cadshell 2.1 is a complete drawing management system.  This
  8. shareware version is provided to give user's a sample of what Cadshell
  9. is capable of.  Cadshell provides the user with a complete shell inter-
  10. face for all their Autocad functions, and maintains a complete drawing
  11. management system also.  This file is a limited documentation file
  12. meant only to introduce you to Cadshell.  To get full documentation and power
  13. from this program a $99.95 registration fee is requested.  Once you get your
  14. feet wet we hope you'll send in for the full program and documentation.
  15.  
  16.  
  17. INSTALL:
  18.         The install program provided should be fairly trouble free to get
  19. Cadshell 2.1 installed.  Simply follow the instructions and it will install
  20. the program completely and build the necessary "Cadshell.bat" file to run
  21. Cadshell 2.1.  Below is a sample configuration file screen to guide you
  22. in installation of the program.
  23.  
  24.  
  25.   ┌────────────────────────────────────────────────────────────────────────┐    
  26.   │ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ │    
  27.   │               *****  INITIAL CADSHELL CONFIGURATION  *****             │    
  28.   │                                                                        │    
  29.   │     Initial AutoCad Path    : C:\ACAD10                                │    
  30.   │                                                                        │    
  31.   │     Network Path to Drawings: S:\CAD                                 ░ │    
  32.   │                                                                        │    
  33.   │     DownLoad Path to Drawing: C:\ACAD10                                │    
  34.   │                                                                        │    
  35.   │     Initial Path to Cadshell: C:\ACAD10                                │    
  36.   │                                                                        │    
  37.   │     Path to Cadshell Config : C:\ACAD10                                │    
  38.   │                                                                        │    
  39.   │     Path to Disk Utility    : C:\PCTOOLS\PCSHELL                       │    
  40.   │                                                                        │    
  41.   │     This User's Call Name   : YOUR NAME                                │    
  42.   │                                                                        │    
  43.   │     Is User Supervisor Level: N                                        │    
  44.   │                                                                        │    
  45.   │     Initial Path For Plots  : LPT2                                 ░░░ │    
  46.   │                                                                        │
  47.   │     Initial Path Spool Log  : S:\SPOOL░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ │    
  48.   │ ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀ │
  49.   └─────────────────────────────────────────────────────────────CAPS     Insert 
  50.  
  51.  
  52.  
  53.  
  54.  
  55. The inputs required here tell Cadshell were everything is located on your
  56. cad system.  Autocad Path is the path to AutoCad.  Network Path is where
  57. your drawings are stored on the fileserver.  Download Path is usually the same
  58. as Autocad Path it is simply the working area on your local hard drive.
  59. Initial Path to Cadshell is also recommended to be the Autocad directory.
  60. Path to Cadshell Config is usually the same as Cadshell Path.  Path to Utility
  61. is the complete path to run your favorite utility shell Pctools is shown above.
  62. User Name is the call name of each station.  Supervisor level is "Y" or "N"
  63. and we suggest limited supervisor status.  A supervisor is capable of unlocking
  64. drawings and a few features the average user should not be provided with.
  65. Path for plots is obvious and could even be A: drive for a sneaker network.
  66. Directory Configuration has three settings we suggest "Standard" for this
  67. shareware version as the other two will not be as effective without the full
  68. program.
  69.  
  70.                       CADSHELL LIMITED DOCUMENTATION
  71.  
  72. Note:   The installation program has created a "Cadshell.bat" file you may
  73.         want to modify this file slightly with a text editor if needed.
  74.         Use this batch file to run Cadshell from the DOS prompt or a menu.
  75.         
  76.  
  77. EDIT:   The edit command works as a graphical version of the Autocad
  78.         main menu's edit command.  Select edit the pick the working sub-
  79.         directory of your choice and select the drawing.  Cadshell will
  80.         launch Autocad with the drawing selected.
  81.  
  82. BEGIN:  The begin command in the shareware version simply deposits you
  83.         at the familiar Autocad begin command.
  84.  
  85. PLOT:   The plot command works similar to the edit command but is used
  86.         to select a drawing to plot.
  87.  
  88. PRINT:  The print command works similar to the plot command but is used to
  89.         select a drawing for printing.
  90.  
  91. CONFIGURE:  Configure is capable of configuring Autocad or Cadshell.
  92.  
  93. CHECKOUT:   Check-Out is the command used to check-out a drawing from
  94.             your library, usually located on the fileserver or floppy disk.
  95.             Select this command then selecte either Floppy Disk or Network.
  96.             If on a network system simply select the directory path to the
  97.             drawing you want.  Pressing the "Enter" key sends Cadshell to
  98.             the next level of sub-directory in the tree, pressing "Tab"
  99.             opens a directory for drawing selection.
  100.  
  101. BACK-UP:    Back-Up is the compliment to Check-Out.  Select Back-Up to return
  102.             an edited drawing to the server.
  103.  
  104. REFERENCE:  Reference allows you to remove a drawing from the fileserver for
  105.             reference use only.  You will not be allowed to Back-Up this drawing
  106.             and other people will still have access to the original drawing on
  107.             the server.
  108.  
  109. MAIL PLOT:  Mail plot sends completed plot files to the network plotter.
  110.  
  111.  
  112.  
  113.  
  114.  
  115.  
  116. FILECARD:   Filecard will be of limited use in the shareware version.  But in
  117.             the full version of Cadshell it maintains a complete drawing record
  118.             of any file on your system.  This important information may be
  119.             exported to your favorite database manager if desired from the
  120.             utility menu.
  121.  
  122. HANDCHANGE: Handchange is a safety valve offered by Cadshell 2.1.  Many times
  123.             a finished plot must be hand modified and the electronic cad drawing
  124.             does not get the same modifications.  Handchange is a flag attached
  125.             to the drawing to warn the next user that this drawing has been hand
  126.             modified.  This will allow the next draftsperson to check the plot
  127.             and update the handchanges to the electronic cad drawing thus
  128.             keeping the cad drawing current.
  129.  
  130. VIEWER:     Viewer is a shell command that launches your favorite viewer
  131.             program. If you don't have one of these useful programs already
  132.             we have an optional one for registered users of Cadshell 2.1.
  133.  
  134. UTILITIES:  The utility menu has many commands we will leave you to explore.
  135.             Some of these do not function fully in the shareware version but
  136.             hopefully you will get the idea.
  137.  
  138.  
  139.                              Registration
  140. _________________________________________________________________
  141. Yes, please register me and send full documentation and support.
  142.  
  143.  
  144.                     * CADSHELL 2.1 DRAWING MANAGER *
  145.                       ----------------------------
  146.  
  147.  
  148.    Company Name______________________________________
  149.    Contact Name______________________________________
  150.    Address___________________________________________
  151.           ___________________________________________
  152.    City,State Zip_______________________     ________
  153.    Phone  (     )______-__________
  154.  
  155. _______________________________________________________________ 
  156.  
  157.    Enclose $99.95 and mail to:  Joe Backes
  158.                                 2009 Southcrest Dr.
  159.                                 Shreveport, La. 71119
  160.                                 (318) 635-5503
  161.  
  162.  
  163.  
  164.  
  165.  
  166.  
  167.  
  168.         A brief note about this shareware version of Cadshell.  Some
  169. of the items under the utilities menu may not function in the demo.
  170. We hope you will fine this a truly useful drawing management tool.
  171. With your $99.95 registration fee you will receive the full documentation
  172. and fully functional software as well as full technical support from
  173. Southland Computer Consultants.  You will also become eligible for an upgrade
  174. to version 3.0 expected out some time in mid 1992.  Version 3.0 will feature
  175. a new mouse driven interface, complete program menu system, and many new
  176. features.  Version 3.0 should be the complete graphical environment to
  177. run Autocad and all your other software from in the 1990's.
  178.  
  179. --------------------------------------------------------------------------
  180. Notes: AID & TBC_ATT are copyrighted terms as follows.  These may be used
  181.        in conjunction with Cadshell.  Since Cadshell is developed as an open
  182.        system additional software may be developed by third parties and used
  183.        to access this information.  We do reserve the right to alter the
  184.        standard and add to it with future releases of Cadshell.
  185.        Documentation on these structures is available with registration.
  186.  
  187.    AID..............Autocad Interface Data (File Card text file)
  188.    TBC_ATT..........Title Block Control Attributes(Attributes system developed
  189.                                                    for extracting Title Block
  190.                                                    information automatically.)
  191.                                                    Registered users only!!!!
  192.  
  193.  
  194. --------------------------------------------------------------------------
  195.  
  196.